Increase your speed of getting to field to field with the folding option. Drago offers more folding sizes than any other brand. See the common sizes below.
Reduce ear loss in tall, down and lodged corn. The attachement is adjustable up and down and out of the way if not needed.
Keeps down corn from leaning over the side and losing hanging ears. Advantages compared to the competition are that our auger starts at the point rather than the back bonnet and angles back toward the center of the row. These features allow immediate correction and straight pull down of the stalk into the rolls. It has a simple suspension system that allows the snoot to float across the ground.
A simpler down corn auger that only goes to the back of the lateral snoot. It offers a more versatile function in normal to less severe down corn.
Accurately maintain header ground clearance with HeadSight's state of the art system, which is proven to reduce yield losses.
Protects your equipment from excessive tire wear by pushing the abrasive top of the stalk to the ground.
A point that is less aggressive for normal standing corn. This point became standard for all 2018 GT and Series II models and can be added to all previous GT and Series II models.
A more aggressive point to help get under down corn. This point was standard on all GT and Series II models prior to 2018 and now is available to order at the dealers parts desk.
Improves feeding in high trash conditions for the Drago GT by using a more aggressive chain that has a longer chain lug to help clear trash into the auger. You have the option to use them on the center 4 rows or across the whole head.
For use in irrigated areas. Bigger bubble protects snoot in fields with pivot tracks
Protects poly from excessive wear in twin row corn.
This system uses three spinning blades that are driven by the gathering chain for a smoother separation of the sunflower head from the stalk.
Allows your Drago to be a dual purpose harvest machine with ease. The knife slides up between the two deck plates and locks into place by tightening just three bolts.
Provides highest level of residue sizing in Drago models Series I and II, decreasing the size of plant material left in the field. Only available on 30” rows and wider. Combines the stationary knife with a half moon shield keeping material in longer to achieve a finer cut. The Turbo Chop Shield also redirects the flow of material reducing any windrow effect.