MENU

FOLLOW US
DEALER

THE MOST INDUSTRY-FIRSTS AND ADVANCES IN CORN HEAD HISTORY.

The Drago GT once again raises the bar on corn head performance and return of ownership with more industry firsts. The result is a corn head like no other and by which all others are measured.

 

AUTOMATIC SELF-ADJUSTING DECK PLATES NOW WITH QUADSUSPENSION.™

The heart of Drago's Kernel Capture Technology™ lies just within the point of stalk entry - where corn meets machine. It is here where Olimac revolutionized harvest technology with the introduction of Automatic Self-Adjusting Deck Plates - and now with QuadSuspension™ ear shocks.

 

WHEN IT COMES TO CAPTURING MORE CORN, THE LONGER THE KNIFE ROLLER, THE BETTER.

The industry's longest knife rollers combine with a smaller diameter for added plant processing time. The extra time means roller tips can run slower, resulting in less ear bounce - less ear loss - without having to reduce combine speed. No other knife roller measures up to the performance of a Drago GT knife roller.

 

INTRODUCING TWIN CHOP - ANOTHER INDUSTRY FIRST FOR THOSE WHO PUT KERNEL CAPTURE FIRST.

The Drago GT's new Twin Chop+ option allows knife rollers to run slow for maximum yield retention and still have continuous chopping of the stalk as it travels back and down through the entire length of the knife roller.

 

SINGLE CHOP FOR FLEXIBLE NEEDS.

Drago GT offers a single chop option for standard sizing. Plus, an on and off engagement lever that provides field-to-field residue management flexibility.

 

ENDURA DRIVE™- NOT ONLY BUILT BETTER, BUILT TO LAST LONGER.

Endura Drive transfers more power from the combine to the row unit, using fewer gears while delivering power straight forward for maximum efficiency. A simple, durable and efficient delivery of power.

 

A DYNAMIC DELIVERY SYSTEM DESIGNED TO CAPTURE EVERY KERNEL.

Corn heads may all look the same, but they certainly don't perform the same. Most yield-loss occurs at the corn head rather than the combine behind it - ears bouncing off bonnets, butt-shelling at pull-down, kernels lost through deck plates - everything the Drago GT Dynamic Delivery System works to prevent.

 

SPIRAL BEVEL GEAR BOXES - THE MOST DURABLE AND EFFICIENT GEARBOX POSSIBLE

Spiral gear cutting produces a quieter and higher performing power transmission used heavily in the automotive industry. Spiral gears always have two teeth engaged vs. straight gears that have only one, making spiral the most efficient way to transmit power 90 degrees.

 

THE ONLY CORN HEAD WITH INDEPENDENT COMPONENT PROTECTION.

Each major component of Drago GT is individually protected; including auger, knife rollers, gathering chain drives and choppers. This Drago design delivers maximum protection to equipment and added peace of mind to the operator.

HEAD TO HEAD

FEATURE GT Series II Deere Case IH
Deck Plates
QuadSuspension™ x
Auto Self Adjusting Deck Plates x x
Hydraulic x x
Knife Rolls
Knife Roll Length 22.5 inches 22.5 inches 18 inches 19 inches
Lower Velocity Knife Rolls x x
Head Angle
Head Angle Low Profile Low Profile Steeper Profile Steeper Profile
Drive System
All sizes Gear Driven Gear Driven 12 rows+ Chain Drive Chain Drive
Auger
Auger Flighting Diameter 20 inches 13 inches 18 inches 16 inches
Auger Drive Gear Chain Chain Chain
Row Unit Gearboxes
Large & Precise Spiral Bevel Large & Precise Straight Bevel Small Straight Bevel Small Straight Bevel
Chopping Options
Twin Chop+ (option) x
Single Chop (option) x x x x
Protection
Independent Component Protection x
Only one slip clutch per row unit x x x
Manufacturer's Guarantee
Warranty 1 Year Parts + Labor 3 Year Parts + 1 Year Labor 1 Year Parts + Labor 1 Year Parts + Labor
No Back Order Parts Guarantee* x x
*During harvest, any Drago replacement part that is not available from your local Authorized Drago Dealer, one of our 3 Regional warehousing part hubs or from our North American Headquarters and has to be back-ordered from the manufacturer, the part plus the shipping is free. Learn More